There’s been some chatter in the comments over the past several days over the DOJ settling with the anarcho-libertarian who set up a company to make the blueprints for 3D printing guns and gun parts readily available and to sell his own CNC machine so that people can machine gun parts at home using the blueprints available from him. Yesterday a Federal judge issued a temporary restraining order on the release of the blueprints by Defense Distributed. The simple truth is the temporary restraining order is pointless. The CAD files are available from download at numerous other sites on the Internet. As all good browncoats know, you can’t stop the signal!
Before anyone starts to freak out because people will be able to 3D print their firearms, you can’t 3D print any form of firearm that is going to do much but blow up in your hands after a few shots. The plastics just can’t take the pressures. So you can get a shot or two plastic zip gun and maybe that’s it. Even the highest end, most advanced 3D printers that can print metal aren’t advanced enough to fabricate a decent firearm that is going to be sturdy enough. If you’re looking to print a new butt stock or the grip module for say a SIG P320 or a Beretta APX – both of which have a removable fire control unit that under Federal law is the serialized gun – then 3D printing is fine. But printing the lower receiver for an AR pattern rifle, which is the serialized part of an AR pattern rifle and therefore technically/legally the gun, is just stupid. All you’re going to do is hurt yourself because the plastic lower receiver can’t take the pressures. And you can’t print barrels out of 3D plastic filament that can handle the pressures either.
Not to rag on SIG Sauer, but SIG just released a brand new subcompact pistol, the P365. It is a similar concept to their P320, which with a couple of modifications, is the new duty side arm for the military the M17 (full size) M18 (compact). The actual firearm for both the P320 and the P365, according to the law, is the removable fire control unit (FCU), which is the serialized part. The slide is machined steel. The FCU, the return spring, the striker, the trigger springs, etc are all machined. Either directly produced or by metal injected molding (MIM). The trigger is plastic and the grip module (frame), is polymer. The magazines are metal. SIG spent significant amounts of money designing, creating a prototype, testing a prototype, etc. In the first several months of the production run they’ve been making rolling adjustments to both the production process and the design of several parts as a small number of problems have been reported. Initially it was barrel peening because of the fit between slide and barrel as it returned to lock up. Then it was a problem with the trigger spring on the FCU, as well as issues with the striker.
This is not surprising. There has not, as far as I know, been a new handgun debuted that hasn’t had production teething issues. Largely because they are mass produced items where the parts have slight variations while still technically being in spec. SIG has this problem with the new P365. They had a different issue that came to light last year with the P320. In fact Springfield Armory, which just rolled out a new variant of their pistol that is a direct competitor to the P365, has also introduced a marketing campaign that takes direct aim at the new competition without naming the competition.
Remington has had significant trigger problems with the triggers on one of their best selling shotguns. There are so many of these shotguns in circulation that it will take them decades, if not hundreds of years, to replace all the triggers if they do nothing but replace triggers 24/7. GLOCK, known for their GLOCK Perfection advertising campaign, have had several issues as they move from generation to generation or introduce new items within a generation. And these are just ones I can think of off the top of my head. And that’s before we mention that even in a perfected, if you will, firearm, because there are always some variations in production runs of parts, even a largely reliable, trouble free firearm line will produce the occasional lemon.
If the professionals, with professional gunsmiths and hundreds of years of experience among those gunsmiths, have teething issues in their professionally manufactured and assembled firearms, all the 3D printed ones made at home are going to do is get a lot of people self perforating with ABS plastics. Unless and/or until the 3D printing technology, specifically the 3D printing technology for metal, gets a lot more advanced and a lot cheaper for personal purchase and use, all that is going to happen is that people trying to make ghost guns are going to be just as likely to blow their hands up as hit what they might be aiming at with a roll your own gun made of plastic filament. And then the lawsuits for damages will start. The 3D printing manufacturers will claim that injured people need to sue the anarcho-libertarian pushing to publish the plans. And then he’ll be in a lot of legal jeopardy.
Obligatory musical accompaniment:
Open thread!